Table of Contents
Advertisement
The blower has a rheostat, see the illustration on the right to identify
the different adjustment positions; either from high (HI) to low (LO)
or closed (OFF).
When using the optional blower manually, allow the stove to reach operating temperature
(approximately one hour), before turning it on. The increased airflow from the blower cools the
firebox and could affect the start-up combustion efficiency if the blower is turned on too early. An
optional thermodisc kit is provided with the blower to enable the blower to start or stop
automatically when the stove is hot or too cold.
Detailed instructions for installing the blower and thermodisc (detail A) are provided with each of
these accessories.
CAUTION: ENSURE THAT THE BLOWER'S POWER CORD IS NOT IN CONTACT WITH ANY
SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT
RUN THE POWER CORD BENEATH THE STOVE.
48
Solution 1.3 Installation and Operation Manual
Advertisement
Table of Contents
