Installing The Horizontal Arm - KaVo FOCUS 215720 Installation Manual

FOCUS
2. Connect the RJ45 coupler to the remote
controller cable.
NOTICE! For details on how to connect the
mains wiring, see chapter 4.10 Connecting
mains wiring.
3. Continue the installation according to chapter
4.4 Installing the scissors arm.

4.3 Installing the horizontal arm

Lift the horizontal arm to its place and attach the
nuts as shown in the image below. Note that there
are two nuts on each side of the wall mounting
bracket. Leave the nuts slack to allow for leveling.
Adjust the wall mounting arm bracket by means of
a level (there is ±2° adjustment allowance).
4 Installation steps
17