Section 1: Getting Started; Choosing A Good Location - Primera SignatureEVO User Manual

Section 1: Getting Started

THANK YOU...
...for purchasing a Signature EVO Slide Printer. The Signature EVO Slide Printer can significantly
increase the efficiency of your lab while helping to reduce the risk of misidentification of
specimens. It prints directly onto slides, eliminating handwriting or expensive, difficult to apply
xylene-resistant labels. With impressive 300 dpi print resolution, you can print text, graphics
and logos along with high-resolution linear and 2D bar codes on every slide you process.
To begin using your Signature EVO, please read this manual carefully. This Operator's Manual is
a guide to the Signature EVO Slide Printer only. There are other accessories and software that
work with the Signature EVO Slide Printers. Those items are purchased separately and include
their own user's manual.
NOTE ON TERMS AND CONVENTIONS
From this point forward, the following terms and conventions will apply:
The Signature EVO Slide Printer will be referred to simply as the Printer.
1A. Choosing a Good Location
•
Place the Printer in a location with adequate air circulation to prevent internal heat build-
up. You will need at least 18" (46 cm) of overhead space to allow the top cover to open
freely.
•
Do not place the Printer near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.
Page | 4