Repairing/Preventing Ribbon Breaks - Primera SignatureEVO User Manual

3F. Repairing/Preventing Ribbon Breaks
Ribbon breaks can occur if the head setting is too high. To repair a ribbon break follow this procedure:
1. Open the cover.
2. Locate the supply roll ribbon. Place it on the top of the print as shown below. Attach a piece of tape.
3. Feed the supply side of the ribbon under the take up roll. Tape the supply ribbon to the take-up roll.
4. Manually turn the take-up roll several complete rotations to prevent the tape from coming loose.
5. Close the Cover.
Page | 28
Tape Sticky Side Down