SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. OPERATE THE UNIT WITH ONLY THE PROPER ELECTRICAL SPECIFICATIONS AS LABELED ON THE PRINTER AND AC ADAPTER IBM is a registered trademark of International Business Charged by Pictographics is a registered trademark ®...
ECP . SOFTWARE INSTALLATION Once you have set up your printer, you must then install all of the appropriate software required for printing. The included CD contains all of the necessary software. At a minimum, you must install the printer driver appropriate for your computer’s...
Page 5
2. Click on the Start button on the task bar, point to Settings, and select Printers. 3. Double-click on the Add Printer icon. This will launch the Add Printer Wizard. Click Next, then click Next again. 4. Click the Have Disk button.
Page 13
DO NOT REMOVE THE COLOR BARCODE LABEL! 6. Push the cartridge back until it snaps into place. 7. Close the printer’s front cover. If you leave the door open, ambient light can interfere with proper cartridge initialization. 8. Press and hold the carriage returns home, then release.
E. REPLACING OR SWITCHING INK CARTRIDGES Once you begin using your CD Color Printer IV on a regular basis, you will eventually need to replace an empty ink cartridge or switch between color and monochrome cartridges. Please refer to the following steps: 1.
Section 3: Using the CD Color Printer IV with Windows A. CONNECTING THE PRINTER TO YOUR COMPUTER The CD Color Printer IV is designed to be used with nearly any IBM-PC or compatible running Windows 2000/XP , or ® Windows 95/98/Me.
The printer must have its Power light illuminated to receive data. If the light is not on, press the B. INSTALLING THE PRINTER DRIVER The CD Color Printer IV can be used with virtually any Windows application program. This is accomplished by...
Page 21
3. Double-click on the Add Printer icon. This will launch the Add Printer Wizard. Click Next, then click Next again. 4. Click the Have Disk button. 5. Click Browse, select your CD-ROM drive. 6. For Windows 95/98/Me, open the Win98-Me\Driver folder and select the file named CDCOLOR4.INF.
Page 25
NOTE: Most applications allow you to change these same printer driver options from their “Print” and/or “Printer Setup” screens. This means that you don’t have to go back to the main printer setup window each time you want to change a setting or option in the printer driver.
Page 28
Spooler software has been installed. When selected, this option allows the printer driver to send all print jobs to the 32-Bit Print Spooler rather than to the Windows system print spooler. See Part C of this section for complete details on the 32-Bit Print Spooler.
Section 6: Technical Specifications Model: CD Color Printer IV Print Method: Ink-Jet Printing Resolution: 1200 x 1200 dpi, 600 x 600 dpi, or 600 x 300 dpi, driver selectable. Print Speed: Depends upon percentage of coverage and print mode selected.
Need help?
Do you have a question about the Signature IV and is the answer not in the manual?
Questions and answers