Slide Specifications - Primera SignatureEVO User Manual

1D. Slide Specifications
Slides should be 1.00" x 3.00" x .040" and have ground edges. Primera recommends using
clipped corners (1mm x 1mm), but 90° corner slides can also be used. The slides must have a
coated frosting, and it should cover 20mm of the length of the slide. The coating must be of
uniform thickness across the entire width of the slide. The Signature EVO Slide Printer uses
thermal transfer print technology. This print technology requires stricter standards on the
surface finish and cleanliness of the slide's frosted coating compared to slides that are used
with ink jet technology printers. The coating must be smooth and free of any clumps or dust
embedded in the coating or print defects will occur.
Page | 8