Identifying The Parts - Primera SignatureEVO User Manual

1C. Identifying the Parts
The following illustrations show the various parts of the printer. These parts will be referred to
throughout this manual so return here if you ever encounter a term that is unfamiliar to you.
Cover Release Button
Slide Cartridge
Control Panel
The Cover Release Button is a mechanical button that releases the spring-loaded mechanism
on the cover.
The Power Button turns off the printer when the cover is closed. When the cover is open,
press and hold the power button to reverse the slide rollers motors.
The Slide Button will advance any slide stuck in printer to the Slide Bin. When the cover is
open, press and hold the slide button to advance the slide roller motors.
The Output Bin will hold 15 Slides when it is fully ejected. Pull the Slide Bin forward to fully
eject it. A sensor will trip if more than 15 standard 1mm slides are in the bin.
The Control Panel can be used to view printer status, Error messages and Network
information.
The Slide Cartridge holds 100 blank Slides.
Page | 6
Power Button
Slide Button
Output Bin