Replacing The Print Head - Primera SignatureEVO User Manual

3C. Replacing the Print Head
If cleaning the print head (Section 3B) does not resolve a quality problem such as a vertical line through the entire
print, it may be time to replace the print head. Print heads are designed to last tens of thousands of prints.
However, it is possible a premature failure could occur if high heat settings were continuously used, it is used in a
particularly hot environment or if slides not recommended for the printer are used.
Print Head Part Number : 78250
1. Unplug Power.
2. Open the printer cover.
3. Locate the Print head mounted to the underside of the cover.
4. Push back , then down and then flip it 180 degrees to reveal the cable connector.
Watch the pin on the side of the print head mechanism to guide the print head
out of the metal housing.
Page | 23
Vertical Line