TRENDnet User's Guide
Diagnostic LEDs
•
Power LED
: When the Power LED is on, the device is receiving
On
power.
: When the Power LED is off, the power adapter is
Off
not connected or the device is not receiving power.
•
PoE MAX (Power over Ethernet Max.)
When reaching near the max PoE power budget
provided 130W or above, the LED will turn on and
On
:
the system will not provide power additional PD
(PoE client devices) after max PoE budget is
reached.
: When the PoE power provided is below the 130W
Off
PoE power budget.
•
Gigabit Ethernet PoE+ Port LEDs (1-8)
Link/Activity button Mode
Green
: When the Green LED is on, the respective port is
on
connected to a 1Gbps Ethernet network.
Amber
: When the Green LED lights on, the respective port
on
is connected to a 10/100Mbps Ethernet network.
© Copyright 2023 TRENDnet. All Rights Reserved.
PoE Web Smart Switch Series
Green
: When the LED is blinking green, the port is
Blinking
transmitting or receiving data on the network at
1Gbps speed.
Amber
: When the LED is blinking amber, the port is
Blinking
transmitting or receiving data on the network at
10/100Mbps speed.
Off
When the LED is off, the respective port is
disconnected.
•
Gigabit Ethernet Port PoE+ LEDs (1-8)
PoE LED button Mode – Green LED on
Green
: When the Green LED is on, the connected device is
on
receiving power.
Amber
: When the Amber LED lights on, the connected PoE
on
device is not receiving power. The cause is either
insufficient power budget, or due to
Class/PowerLimit restrictions in the PoE
configurations.
Off
: When the LED is off, the respective port is either not
connected to a PoE device or is disconnected.
•
SFP Slots (9-10)
Link/Activity
Green on
: When the SFP LED is on, the link established
using the SFP module is operating at 1Gbps
speed.
Green
: When the SFP LED is blinking, the port is
blinking
transmitting or receiving data on through the
1Gbps link established.
v