TRENDnet TPE-30284 User Manual page 29

TRENDnet User's Guide
Diagnostic LEDs
•
Power LED
: When the Power LED is on, the device is receiving
On
power.
: When the Power LED is off, the power adapter is
Off
not connected or the device is not receiving power.
•
PoE MAX (Power over Ethernet Max.)
When reaching near the max PoE power budget
provided 370W or above, the LED will turn on and
On : the system will not provide power additional PD
(PoE client devices) after max PoE budget is
reached.
: When the PoE power provided is below the 370W
Off
PoE power budget.
•
Fan Error
: When the internal fan is not operating normally, the
On
Fan Error LED will turn on.
: When the internal fan is operating normally, the
Off
Fan Error LED will remain off.
•
Gigabit Ethernet Port LEDs (1-24)
© Copyright 2023 TRENDnet. All Rights Reserved.
PoE Web Smart Switch Series
Link/Activity button Mode
Green : When the Green LED is on, the respective port is
on connected to a 1Gbps Ethernet network.
Amber : When the Green LED lights on, the respective port
on is connected to a 10/100Mbps Ethernet network.
Green : When the LED is blinking green, the port is
Blinking transmitting or receiving data on the network at
1Gbps speed.
Amber : When the LED is blinking amber, the port is
Blinking transmitting or receiving data on the network at
10/100Mbps speed.
Off When the LED is off, the respective port is
disconnected.
•
Gigabit Ethernet PoE+ Port LEDs (1-24)
PoE LED button Mode
Green : When the Green LED is on, the connected device is
on receiving power.
Amber : When the Amber LED lights on, the connected PoE
on device is not receiving power. The cause is either
insufficient power budget, or due to
Class/PowerLimit restrictions in the PoE
configurations.
Off : When the LED is off, the respective port is either not
connected to a PoE device or is disconnected.
•
SFP Slots (25-28)
Link/Activity
xxiii