Changing The Air Inlet Filter - Breas Clearway 2 User Manual

Changing the Air Inlet Filter

The air inlet filters are located on
the back of the device and
accessed by simply removing the
filter housing.
There are two types of filter to be
used:
1. cleanable filter
2. disposable filter
The filters should be inspected weekly, and changed if discoloured, or more
frequently if advised by your referring clinician.
Be careful when fitting the filter housing to avoid pinching skin.
Cleanable Filter (grey)
Clean the cleanable filter at least once a week and replace once a year.
1. Remove and separate the two filters.
2.
Carefully vacuum the cleanable filter to remove any build-up of dust.
Extra care should be taken to ensure the filter media is not damaged
during cleaning. Alternatively, simply replace the grey filter.
Disposable Filter (white)
Replace the white filter at least every 4th week, or more frequently when
used in high pollution or pollen-rich environments.
Do not wash or reuse the disposable filter, this must always be
replaced with a new filter.
59 Cleaning & Maintenance
Clearway 2 User Manual
DOC-001000 Ver 6