Table of Contents
Advertisement
the LAN. Choose one of three sets of user certificates and private keys; refer to the
Certificates subsection.
•
Authentication Allowed – enable authentication of network devices via the 802.1x PEAP
MSCHAPv2 protocol. Do not enable this function if your LAN does not support 802.1x. If
you do so, the device will become inaccessible.
•
Trusted Certificate – specify the set of trusted certificates for verification of the RADUIS
server public certificate validity. Choose one of three certificate sets, see the Certificates
subsection. If no trusted certificate is included, the RADIUS public certificate is not
verified.
•
Password – enter the access password for PEAP-MSCHAPv2 authentication.
Trace
In
the Trace
tab, you can launch capturing of incoming and outgoing packets on the network
interface. The captured packets can be stored locally in the 4 MB buffer or remotely in the user
PC.
When the local capture buffer is full, the oldest packets are rewritten automatically. We
recommend that you lower the video stream transmission rate below 512 kbps while capturing
packets locally. Press
to start,
to stop and
2N® Indoor View User Manual
to download the packet capture file.
82 / 132
Advertisement
Table of Contents
