Table of Contents
Advertisement
3.2.4.1 Audio
®
2N
Indoor View is equipped with a speaker. Set the phone call and state signaling volume
control in this configuration section. Master Volume controls the general device volume
including call volume, signaling tone volume, and so on. Consider the noise level of the ambient
environment while setting this parameter.
List of Parameters
•
Call Volume – set the phone call volume.
•
Ringtone Volume – set the incoming call ringtone volume.
•
Call Progress Tone Volume – set the dialtone, ringtone and busy tone volume levels. In
case the call progress tones are automatically generated by the PBX, this setting will not
be applied.
2N® Indoor View User Manual
69 / 132
Advertisement
Table of Contents
