Table of Contents
Advertisement
Status and Description
Incoming Call
User Actions
The device is playing the selected ringtone. The display shows the
camera view if available, CLIP and Incoming call message.
Pick up call
Reject call
Door unlocking
The camera is
switched (if
installed and
configured in the
2N IP intercom).
2N® Indoor View User Manual
Navigation
Touch the display
Press the call end
button
Press the lock
button
Press the camera
switching button
/
Actions and Results
The connection is
established and the In call
mode is switched on.
The incoming call is
discontinued and Home
page is returned to.
A call is set up or not
depending on the
connection type and the
door is unlocked. If
automatic call end after
unlocking is enabled, the
call is ended after door
unlocking.
Caution
•
If no unlocking
code is set in the
device and no
Default unlock
code is set, the
lock button is
not displayed.
The display shows a
preview from the other
camera, identification of
the device being called to
and the message Incoming
Call.
115 / 132
Advertisement
Table of Contents
