Appendix C Quick Reference - Peak PCAN-PC/104-Plus User Manual

PCAN-PC/104-Plus – User Manual
Appendix C
Position of the card in the PC/104 stack
Jumper Signal
J7 ID Select
J8 Clock Select
J9 Interrupt Select
Software/Hardware Installation under Windows
Before installing the PCAN-PC/104-Plus card in the PC/104 stack,
please setup the corresponding driver from the supplied CD (with
Administrator privileges). After the installation the card is
recognized by Windows and the driver is initialized.
Getting started under Windows
Run the CAN monitor PCAN-View from the Windows Start menu as
a sample application for accessing the PCAN-PC/104-Plus card. You
can use the preset parameters for initialization of the card without
changes (select the desired CAN channel, when using the Dual
Channel version).
High-speed CAN connector (D-Sub, 9 pins)
Quick Reference
Position in the PC/104 stack
1 2
ID 0 ID 1
CLK 0 CLK 1
INT A INT B
22
3 4
ID 2 ID 3
CLK 2 CLK 3
INT C INT D