Connectors; Connection Primary Side - Peak PCAN-Optoadapter User Manual

2 Connectors

Secondary
side
(D-Sub male)

2.1 Connection Primary Side

The PCAN-Optoadapter is connected to the CAN interface on the primary side.
The lines for the differential CAN signal CAN_H and CAN_L are terminated on the
adapter with a 120-Ohms resistor (fixed). An additional termination at the
CAN interface is not needed.
2 Connectors PCAN-Optoadapter
User Manual 4.1.0 © 2023 PEAK-System Technik GmbH
Top view PCAN-Optoadapter
Pin assignment at the primary side (D-Sub female)
Primary side
(D-Sub
female)
6