Scanner Setup - Socket 7Ci User Manual

I B
NSTALLING ATTERIES AND
1. Use a coin or screwdriver to unlock and remove the battery cover. Turn the lock
underneath the scanner to a horizontal position to unlock.
2. Remove the battery cover.
The Bluetooth Address is printed on a label inside the battery compartment. It helps
you distinguish your CHS from other CHS scanners. If you install SocketScan 10, you can
also check the Bluetooth Address in Scanner Settings.
Bluetooth Address
3. Install the batteries in their correct positions, as indicated by the +/- symbols.
10
A T
TTACHING THE ETHER
2 | S S
CANNER
Revision Letter - follows Part Number
ETUP