Status Indicators - Socket CX2895-1508 Quick Start Manual

STATUS INDICATORS

Status
LED Activity
Bluetooth 1 Blue blink every
second
1 Blue blink every 3
seconds
Good Read Green Constant
(while scanning)
Battery Status Red Blinking
(while scanning and
no AC power)
Red Constant
(while AC power)
Off
(while AC power)
Off
(while no AC power)
26
Meaning
Bluetooth is On but not
connected.
CHS is connected to
device.
Data successfully scanned.
20% or less battery
capacity remaining.
Battery is charging.
Battery is fully charged.
CHS is Off.
Beep Pattern meaning
Low-high tone Power On
High-low tone Power Off
1 low beep Keyboard Pop-up Enable
1 beep CHS connected to device and ready to scan bar-
codes.
1 beep with Data successfully scanned.
Green LED blink
2 beeps, same CHS disconnected from device.
tone
1 long beep CHS tried multiple times unsuccessfully to con-
nect to the last device it paired with. After 5
minutes the CHS will power off.
3 beeps with CHS recognized the Command Barcode and imple-
escalating tone mented the change.
3 beeps with CHS recognized the Command Barcode, but could
escalating tone not implement the change. Verify the Command
followed by a Barcode is valid and retry.
long tone
STATUS INDICATORS (CONTINUED)
27