Scanner Setup - Socket 7Mi User Manual

I B
NSTALLING ATTERIES AND
1. Use a coin or screwdriver to unlock and remove the battery cover. Turn the lock
underneath the scanner to a horizontal position to unlock.
2. Remove the battery cover.
The Bluetooth Device Address (BDA) is printed on a label inside the battery
compartment. It helps you distinguish your CHS from other CHS scanners. If you install
SocketScan 10, you can also check the BDA in Scanner Settings.
Bluetooth Device Address
(BDA)
3. Install the batteries in their correct positions, as indicated by the +/- symbols.
10
A T
TTACHING THE ETHER
2 | S
CANNER
Revision Letter - follows Part Number (P/N)
S
ETUP