KYMCO X-Town 250 ABS Service Manual page 252

19. LIGHTS SWITCHES/ FUEL PUMP
INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch "ON".
＊
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
Measure the resistance
Red/Black and Green wire of the fuel unit
connector.
Standard (at 20° C/68° F):
Float at full position
Float at empty position About 100 Ω
between the
About 1100 Ω
X-Town250/300 ABS
F
E
19-12