KYMCO X-Town 250 ABS Service Manual page 217

15
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
＊
Make sure the spring plate next to the
brake pad dowel pin orientation.
Install two brake pads.
INSTALLATION
Install the brake caliper to the rear fork and
tighten the two bolts.
Torque: 35 N-m (3.5 kgf-m)
Connect the brake fluid tube to the brake
caliper and install fluid tube bolt, copper
washers and tighten the fluid tube bolt.
Fill the brake reservoir with the specified
brake fluid and bleed air from the brake
system.
＊
When installing the brake fluid tube, be
sure to install the two copper sealing
washers.
15-5
X-Town250/300 ABS
Brake Pads
Brake Fluid Tube Bolt
Caliper
Bolts