KYMCO X-Town 250 ABS Service Manual page 258

20
.
EVAPORATIVE EMISSION CONTROL SYSTEM
SERVICE INFORMATION
GENERAL INSTRUCTIONS
 Do not smoke or allow flames or sparks near the working area.
 Note the locations of tubes for proper installation.
 Replace any damaged tube with a new one.
 Make sure to tighten the connector of each tube securely.
TOOLS
 Vacuum pump－A937－014－
 Pressure pump－
SPECIFICATIONS
Purge control valve vacuum pressure
Charcoal canister capacity
A. LEAKAGE TEST PIPING DIAGRAM
Fuel Tank
45mm/Hg
90cc
Charcoal Canister/ Purge Control Valve
Fuel Injector
Throttle Body
Air By Pass Valve
X-Town250/300 ABS
20-2
Manifold
Absolute
Pressure Sensor
Air Cleaner