KYMCO X-Town 250 ABS Service Manual page 88

7. CYLINDER/PISTON
REMOVAL
Remove the cylinder head.
Remove the water hose from the cylinder.
Remove the cylinder head gasket and dowel
pine.
Remove the cam chain guide.
Remove the cylinder.
Remove the cylinder gasket and dowel pins.
Clean any gasket material from the cylinder
surface.
Remove the piston pin clip.
＊
Place a clean shop towel in the crankcase
to keep the piston pin clip from falling
into the crankcase.
Press the piston pin out of the piston and
remove the piston.
7-3
Dowel Pins
Water Hose
Cylinder
Gasket
Dowel Pins
Shop Towel
Piston Pin
X-Town250/300 ABS
Gasket
Cam Chain Guide
Piston