KYMCO X-Town 250 ABS Service Manual page 30

2
. EXHAUST MUFFLER/FRAME COVERS
Disconnect the taillight connector.
, then remove the body cover.
Installation is in the reverse order of removal.
UPPER/LOWER HANDLEBAR COVER
Remove the four screws and then remove
upper handlebar cover.
Remove the two screws, then remove the
bottom handlebar cover.
Disconnect the throttle cable refer to the
"THROTTLE BODY /TPS" section, then
pull the throttle cable out from the lower
cover. Remove the lower cover.
Installation is in the reverse order of removal.
X-Town 250/300 ABS
2-6