Table of Contents
Advertisement
de
Operate the device
3.
The key Start reloading touch
ren.
For programs in the drying process:
1.
Turn the program selector to any other
program.
2.
Wait a few minutes to let the laundry
cool down. The door will then be
unlocked.
End of program
"Ÿš lights up in the display and the displays
À and O are turned off.
If you select 2 only the water is pumped
out after the rinsing process, no spin cycle.
Hints
If in the display panel • © £ flashes
■
before the drying program is finished,
the temperature in the drum is high.
The drum cool down program will run
until the temperature inside the drum
is reduced.
If the laundry is not done within 15
■
minutes of the
When the drying process is completed,
the anti-crease process starts to
prevent the laundry from creasing. The
process takes about 30 minutes. 0:00,
£ '˜, ̃ £ © and "Ÿš are displayed
alternately. In addition, the symbol O
displayed as a status symbol. This
process can be ended by touching any
key. The washing machine door is then
released and the laundry can be
removed.
40
Remove laundry / appliance
switch off
1.
Open the program selector Û ( The end)
to adjust.
2.
Open the washing machine door and
remove the laundry.
3.
Turn off the tap.
Note:
This is not necessary with
AquaStop models.
Hints
Do not leave any items of laundry in
■
the drum. They can shrink during the
next wash or discolour other items of
laundry.
Remove foreign bodies from the drum
■
and the rubber sleeve because of the
risk of rust.
Wipe the rubber sleeve dry.
■
Leave the washing machine door and
■
detergent drawer open so that any
residual water can evaporate.
Always wait for the program to end as
■
the appliance may still be locked.
Then switch on the device and wait
for it to unlock.
Advertisement
Table of Contents
