Table of Contents
Advertisement
Empty the detergent drawer,
clean the detergent drawer
and its housing
If there is detergent or fabric softener
residue in the appliance:
1.
Pull out the detergent drawer. Press
the insert down and remove the
drawer completely.
2.
Removing the insert: Press the insert
upwards from below with your
finger.
3.
Clean the detergent dispenser and insert
with water and a brush and dry them. Also
clean the inside of the housing.
Cleaning and maintenance
4th
Put the insert on and click into place
(place the cylinder on the guide pin).
5.
Slide in the detergent drawer.
Note:
Leave the detergent drawer open
so that any residual water can dry off.
The drain pump is blocked
Note:
Turn off the tap so that no more
water flows in and has to be pumped out
via the drain pump.
:
warning
Risk of scalding!
The suds are very hot when washing at
high temperatures. You may get scalded if
you touch the hot detergent solution.
Let the detergent solution cool down first.
1.
Open the program selector Û ( The end)
to adjust. Pull out the power plug.
de
43
Advertisement
Table of Contents
