Related Manuals for Siemens WN54A2A0HK
Summary of Contents for Siemens WN54A2A0HK
- Page 1 Washer dryer WN54A2A0HK siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Saving energy and detergent . -
Page 4: Intended Use
Intended use and its housing, cleaning the « i-Dos Intended use pump unit ....41 This appliance is intended for private Appliance settings . -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The mains plug and the Warning ■ protective contact socket Risk of poisoning! must match and the earthing Detergents and care products system must be correctly may result in poisoning if installed. consumed. The installation must have an If accidentally swallowed, seek ■... - Page 7 Safety instructions The appliance has sharp Warning Ri s k of i n j u ry! ■ edges on which you could Risk of fire/material damage/ cut your hands. damage to the appliance! Do not take hold of the The use of extension cords or appliance by its sharp power strips may result in fire edges.
-
Page 8: Operation
Safety instructions The use of hoses supplied Rinse the laundry thoroughly ■ ■ by other brands to connect with warm water and to the water supply may detergent before drying it in result in material damage or the machine. damage to the appliance. Do not place laundry in this ■... - Page 9 Safety instructions Warning Warning Risk of fire/material damage/ Risk of injury! damage to the appliance! If you support your weight/sit ■ If a program is terminated on the appliance door when before the drying cycle has it is open, the appliance may finished, this prevents the tip over, which may result in laundry from cooling down...
-
Page 10: Cleaning/Maintenance
Safety instructions products. If accidentally Cleaning/Maintenance swallowed, seek medical Warning advice. Risk of death! Caution! The appliance is powered by Material damage/damage to electricity. There is a risk of the appliance electric shock if you come into contact with live components. If the amount of laundry in ■... -
Page 11: Environmental Protection
Environmental protection Warning Environmental Risk of electric shock/material protection damage/damage to the appliance! P ackaging/used appliance If moisture penetrates the E n v i r o n m e n t a l p r o t e c t i o n appliance, this may cause it to Dispose of packaging in an environmentally-responsible... -
Page 12: Tips On Economical Use
Positioning and connecting Tips on economical use Positioning and connecting Always fill the appliance with the ■ maximum amount of laundry for each programme. S tandard accessories Wash normally soiled laundry P o s i t i o n i n g a n d c o n n e c t i n g ■... -
Page 13: Safety Instructions
Positioning and connecting If the hose and mains cables are not Mains lead ■ routed properly, there is a risk of Bag: tripping and injury. Installation and operating ■ Lay hoses and cables in such a way instructions that there is no risk of tripping. Customer Service location ■... -
Page 14: Installing The Appliance In A Kitchenette
Positioning and connecting On wooden joist floors, install the Keep the screws and sleeves in Note: Note: appliance: a safe place. In a corner, if possible, ■ On a water-resistant wooden board ■ (min. 30 mm thick) which is screwed tightly to the floor. -
Page 15: Removing The Support Struts
Positioning and connecting b) Remove the sleeves. Removing the support struts Unscrew and remove all screws in the vertical transport struts. Fit the covers. Remove the transport struts. Lock the covers firmly in place by applying pressure to the snap-in hooks. -
Page 16: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Water inlet Connection on left side Warning Risk of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve). -
Page 17: Water Outlet
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Connect the water supply hose to connection points. The screw the water tap (¾" = 26.4 mm) and to connection is under mains water the appliance: pressure. -
Page 18: Alignment
Positioning and connecting Alignment Connection Drainage into a siphon Level the appliance using a spirit level. ■ The connection point must be Incorrect levelling may result in intense secured using a hose clamp with a noise, vibrations and "wandering". diameter of 24 - 40 mm (available from specialist dealers). -
Page 19: Electrical Connection
Positioning and connecting Electrical connection Before washing for the first time Warning The appliance was inspected Risk of death! thoroughly before leaving the factory. To There is a risk of electric shock if you remove any residual test water, run the touch live components. - Page 20 Positioning and connecting Disconnect the appliance from the a) Clip the mains cable securely in mains. the holders. Remove the hoses. Empty the dispensers. Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers Leaking detergent/fabric softener can prevent the appliance from working correctly, e.g.
-
Page 21: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 22: Control Panel
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 32 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 33 I Start/Reload button for starting, interrupting, (e.g. -
Page 23: Display Panel
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Ô Wash + Dry Ô/x/Ô ˜ x Display Setting Description +1/+2/+3 l Rinse Plus Ž - 90° Temperature Temperature that s Prewash can be set in °C ( varioSpeed Ž... -
Page 24: Laundry
Laundry Do not exceed maximum load. Status indicators for the programme ■ Overfilling will impair the washing progress (programme sequence) result. Keep detergents and agents for the ■ pretreatment of laundry (e.g. stain remover, prewash sprays, etc.) away from the surfaces of the appliance. Using a damp cloth, immediately remove any fine spray residue and other residue or droplets. -
Page 25: Preparing Laundry For Drying
Laundry – Stains: Remove/pretreat stains Textiles which were treated with ■ while they are fresh. First dab flammable liquids, e.g. with stain with soapy water; do not rub. remover, petroleum ether, thinners. Then wash the items of laundry Risk of explosion! with the appropriate programme. -
Page 26: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 27: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 28 Overview of programmes Programme/Type of laundry Options/Information Easy-Care Ó 4,0 kg/2,5 kg Textiles made of synthetic materials or blended fabrics. Ž - 60 °C 400 - 1400 rpm ( varioSpeed, s Prewash, l Rinse Plus, Ô Wash + Dry Ý è, © è Mix Ñ...
- Page 29 Overview of programmes Programme/Type of laundry Options/Information Drum Care k 0,0 kg/0,0 kg Special programme for drum hygiene or fluff removal. Do not Ž, 40°C, 90 °C load any laundry. Fixed drying process is followed to dry drum 1000 rpm and gasket.
- Page 30 Overview of programmes Programme/Type of laundry Options/Information $ Shirts 2,0 kg/2,0 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres Ž - 60 °C or blended fabrics. 400 - 800 rpm s Prewash,l Rinse Plus, Ô Wash + Ý...
-
Page 31: Drying Table
Overview of programmes Drying table Estimated drying time (min) Recommended dry- Drying load (kg) Ô Wash + Dry ing programme Cottons v/Cottons 1.0-2.0 50-80 Eco t 2.0-4.0 80-140 4.0-6.0 140-200 Easy-Care Ó/Mix Ñ 0.5-1.5 50-70 1.5-2.5 70-100 ± The time listed above is the reference value, the actual drying effect may be affected by the clothing type, clothing weight, dehydration degree and ambient temperature. -
Page 32: Programme Default Settings
Programme default settings B Finish in/myTime Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h (h = hour) Y ou can change the default settings for increments (between “minimum P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 33: Additional Programme Settings33
Additional programme settings The individual washing mode: when ■ Additional programme select a programme (e.g.% Wash & Dry 60') that defaulted washing and settings drying phases combined, touch Ô Wash + Dry till only the symbol x You can find possible additional N ote: appeared in display. -
Page 34: I-Dos Setting
Operating the appliance ( varioSpeed Insert mains plug. Warning Washing in a shorter time while Risk of death from electric shock! achieving a washing result that is Risk of death if live parts are consistent with the normal performance. touched. Touch ( varioSpeed to activate or –... -
Page 35: Placing Laundry Into The Drum
Operating the appliance Placing laundry into the drum For programs without intelligent dosing, or if you wish to control the dosing Open the door, place laundry in the yourself (in which case, deactivate drum, make sure that no items of intelligent dosing), you will need to add laundry are trapped between the door detergent manually to the manual... -
Page 36: Adding/Removing Laundry
Operating the appliance Adding/removing laundry Cancel the programme After starting the programme (only for For programmes washing at high washing), you can add or remove temperatures: laundry if necessary. Touch the I Start/Reload button. To cool down laundry: Select ¬ Touch the I Start/Reload button. -
Page 37: Removing Laundry/Switching Off The Appliance
Intelligent dosing system Removing laundry/switching Intelligent dosing off the appliance system Set programme selector to Û (Off). F amiliarising yourself with « Open the door and remove the I n t e l l i g e n t d o s i n g s y s t e m laundry. -
Page 38: Before Setting Up " I-Dos
Intelligent dosing system Before setting up « i-Dos Start the programme. The drum rotates and, depending on Follow the manufacturer's instructions the programme selected, load when choosing your detergent and care detection takes place (takes up to 2 product. We recommend using easy- minutes). -
Page 39: I-Dos Setting The Dosage
Intelligent dosing system « i-Dos Setting the dosage Adjusting the basic dosage Press and hold « i-Dos for approx. The basic dosage is the recommended three seconds. dosage for a typical load of household The basic dosage setting is laundry weighing 4.5 kg. The quantity of displayed for one of the dispensers. -
Page 40: Manual Dosing
Intelligent dosing system Open the dispenser lids. When refilling the dispensers, Note: always use the same type of liquid detergent or fabric softener. Do not mix different types of liquid detergent or fabric softener, as this can form lumps that may block the « i-Dos pump unit. -
Page 41: Pump Unit
Intelligent dosing system Pour laundry detergent and/or care Press down the insert and remove product into the manual dosing the drawer completely. compartment. Press the pump unit insert and Push in the detergent drawer. remove it. Emptying the « i-Dos Unclip the rear detergent drawer lid detergent drawer, cleaning the and remove it. - Page 42 Intelligent dosing system Clean the pump unit with a damp Dry the drawer, lids and pump unit cloth. and put them back together. Caution! The pump unit contains electrical components.These may be damaged if they come into contact with water. –...
-
Page 43: Appliance Settings
Appliance settings 4: Switching the drum care ■ Appliance settings information signal on/off. Y ou can change the following settings: Ž A p p l i a n c e s e t t i n g s Œ off The volume of the end signal. -
Page 44: Cleaning And Maintenance
Cleaning and maintenance Drum Cleaning and Use chlorine-free cleaning agents, do maintenance not use steel wool. If there are odours in the appliance, or Warning C l e a n i n g a n d m a i n t e n a n c e to clean the drum, run the Drum Care Risk of death! k 90°C programme without laundry. -
Page 45: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Take the drain hose out of the Close the service flap. retainer. Remove the sealing cap and pour the water out into a suitable container. Replace the sealing cap and place the drain hose back in the retainer. To prevent unused detergent Note: from flowing straight into the drain... -
Page 46: Filter In The Water Supply Is Blocked
Faults and what to do about them Filter in the water supply is Clean the filter with a small brush. blocked Release water pressure in the supply hose: Turn off the water tap. Select the Cottons v (activate ( varioSpeed setting) programme. If your appliance with Note: intelligent dosing system... -
Page 47: Information On The Display Panel
Faults and what to do about them Open the service flap. Warning Risk of injury! Reaching into the drum while it is still turning may cause hand injuries. Do not reach into the drum when it is turning. Wait until the drum has stopped turning. Caution! Water damage! Any escaping water may cause water... - Page 48 Faults and what to do about them Display Cause/Remedy The symbol k Run the Drum Care k programme to clean and care for the drum and the outer flashes tub. Notes Run the programme without laundry. ■ Use washing powder or a detergent containing bleach. To prevent foaming, ■...
-
Page 49: Faults And What To Do About Them
Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the screw fitting on the supply hose. ■ The door cannot be - - - (Rinse hold = no final drain) is activated (depending on the module). - Page 50 Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
- Page 51 Faults and what to do about them Faults Cause/Remedy The washing result is not « i-Dos check the dosage settings and, if required, increase the basic dos- ■ satisfactory. age. Use a different liquid detergent. ■ Brief whirring sound twice Not a fault –...
- Page 52 Faults and what to do about them Faults Cause/Remedy Spin noise during the dry- This is an innovative process known as thermal spinning used to reduce energy ing phase. consumption during the drying phase. It is designed like this, please wait until programme finished.
-
Page 53: After-Sales Service
After-sales service Faults Cause/Remedy The drying result is not After the end of the programme, warm laundry feels damper than it actu- ■ satisfactory (laundry is ally is. Spread the laundry out and allow the heat to disperse. not dry enough). Excessively high ambient temperature (above 30 °C) or inadequate ventila- ■... -
Page 54: Consumption Values
Consumption values Consumption values E nergy and water consumption, programme duration and residual moisture for C o n s u m p t i o n v a l u e s the main washing programmes (approximate values) Programme Load Energy consump- Water consump- Programme... -
Page 55: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 848 mm x 598 mm x 590 mm In addition to warranty claims against (height x width x depth) - Page 56 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001462277* 9001462277 (0005)