Table of Contents
Advertisement
de
Cleaning and maintenance
2.
Open the service flap.
3.
Take the drain hose out of the holder.
Remove the cap and allow the lye to
drain into a suitable container.
Reattach the cap and reinsert the drain
hose into the holder.
4th
Carefully unscrew the pump cover.
Residual water can run out.
Clean the interior, the pump cover
thread and the pump housing. The
impeller of the detergent solution
pump must turn.
44
5.
Reinsert the pump cover and screw it
on. The handle must be vertical.
6th
Close the service door.
Note:
To prevent unused detergent from
flowing into the drain during the next
wash, pour 1 liter of water into dispenser
II and run the program Pumping out start.
The drain hose at the siphon is
blocked
1.
Open the program selector Û ( The end)
to adjust. Pull out the power plug.
2.
Loosen the hose clamp. Carefully pull
off the drain hose as residual water
can run out.
Advertisement
Table of Contents
