Additional Program Settings; Gen; Dry Ô; Prewash - Siemens WN34A140 Manual

Table of Contents

Advertisement

\
Additional programs
opinions
Note:
In the overview you will find

Additional program settings

possible additional program settings;
these differ depending on the model.
With the selection of additional program
settings, you can adapt the washing /
drying process even better to your laundry
items.
The settings can be selected or deselected
depending on the progress of the
program.
The indicator lamps for the buttons light
up when the setting is active.
The settings are retained after
switching off.
dry O
The key dry O Touch to activate or
deactivate the drying function. When the
function is activated, washing and drying
are possible without interruption (only for
pro
gram with optional drying).
Depending on your needs, there are three
different dryness target modes available for
selection:
»( Cupboard dry): For single-layer textiles.
Garments can be folded or hung in the
closet. This is the default dry target mode.
In this mode, the drying time is
automatically set according to the amount
of laundry to be dried.
¾ ( Cupboard dry +): Made for textiles
thick, multi-layered fabrics that need to be
dried longer. Garments can be folded or
hung in the closet. The laundry is drier
than Cupboard dry.
Additional program settings
Ø ( Iron dry): For delicate laundry.
Textiles suitable for ironing (iron textiles
to avoid creasing). Garments can
can also be hung up to dry.
if dry O is activated, the drying process
follows the washing process. If only the
individual drying programs are required,
the selection of O Intensive
Dry, O Gentle drying or O
Time program drying possible.
Hints
Do not exceed the maximum load
when drying. Program overview ~ "
Selectable
Program "on page 29
The maximum spin speed for
programs with a drying phase is
selected automatically in order to
achieve a good drying result.

prewash

Prewash for heavily soiled laundry.
The key prewash Touch to activate or
deactivate the prewash.
Note:
The detergent in the
dispenser I. and II fill in.
Anti-crease
A special operating mode with reduced
spin speed and subsequent loosening to
reduce creasing.
Anti-crease Touch to activate or
deactivate them.
Note:
if Anti-crease active
fourth, the residual moisture in the
laundry is increased after spinning.
de
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wn34a190

Table of Contents