Table of Contents
Advertisement
Notes on the display panel
advertisement
O
• © £
|
w shines
The symbol k
flashes.
E: 36
alternating with
- 10
E: 35
alternating with
- 10 ( suitable for
special models)
Cause / remedy
■
Flashes quickly + beep: The washing machine door was opened when the water level was
too high. Close the washing machine door and the program with the button
Start reloading continue or Pumping out choose.
Flashes slowly: The window locking temperature is too high to open
■
the loading door. Wait about 30 seconds for the window lock to cool
down.
The temperature in the drum is too high. Let the machine run and wait until
the laundry has cooled down enough that • © £ is no longer displayed. The
washing machine door can then be opened.
Flashes ( no water supply): Is the tap turned on? Is the filter in
■
the water inlet blocked? ~ " Clogged water inlet filter "on page 45
Is the inlet hose kinked or pinched?
Shines ( low water pressure): For information only. This has no effect on
■
the progress of the program. The program duration is extended.
The child lock is activated. Please deactivate.
The program Cotton 90 ° C to clean and care for the drum and the
tub.
Hints
Run the program without laundry.
■
Use powder detergent or a detergent containing bleach. To avoid
■
foam formation, only use half the amount of detergent recommended
by the detergent manufacturer. Do not use any wool or mild
detergents.
Switch the drum care information signal on / off. ~ Page 41
■
Clogged drain pipe or water drainage hose. Clean the drain pipe
■
and water drain hose.
The drain pipe or water drainage hose is kinked or trapped.
■
Make sure that the drain pipe and the water drainage hose are
not kinked or pinched.
The drain pump is blocked.
■
~ " The drain pump is blocked "on page 43
The drain hose on the siphon is blocked.
■
~ " The drain hose at the siphon is blocked "on page 44
The water drainage hose is connected too high. Install the water
■
drainage hose at a maximum height of 1 meter.
~ Page 16
There is water in the floor pan. The device is leaking. Close the
water tap. Call customer service.
Malfunctions and remedial measures
de
47
Advertisement
Table of Contents
