Using The M2 Genesis Control Panel - Landice Move Series Owner's Manual

Treadmill Quick Start Guide

Using the M2 Genesis Control Panel

This manual covers the Landice M2 with Genesis control panel. Quick
start instructions for this control panel are outlined below. See page 41
for complete instructions.
A quick start guide for using the treadmill console controls is provided
in the following table.
Treadmill Controls: Quick Start Guide
To Start the Treadmill: Tap the console to wake up the screen from sleep-
mode. When the screen is awake, select a client or guest, then press
START to begin a manual workout. The treadbelt will begin to move at 0.5
mph.
To Turn Off the Treadmill: Press STOP once to stop the treadbelt. After 10
minutes the console will automatically enter sleep mode. To force the
console into sleep mode sooner, press the STOP button twice on the Lower
Control Panel. To turn the treadmill completely off, turn off the power switch
located near the power cord on the front of the treadmill.
To Pause the Treadmill: Press PAUSE icon to pause the treadbelt and
statistical calculations. To remove pause press the green play icon. If you
are in a program the treadmill will restart at the paused speed.
6