Table of Contents
Advertisement
4. Maintenance and Troubleshooting
It is important to perform maintenance on your treadmill.
Failure to maintain the treadmill could void the Landice
Warranty. To reduce risk of electrical shock, always turn off the
treadmill using the ON/OFF switch and unplug from the power
source.
4.1.
Inspection
Landice is not responsible for performing regular maintenance
or inspections. Users should inspect the treadmill before each
use for torn or frayed power cords, safety lanyards, loose bolts,
screws, fasteners, and any other signs that service is required.
Please contact your local service provider or visit
www.landice.com/pages/service-locator to arrange service.
DO NOT USE until treadmill has been serviced and damaged
parts have been replaced.
4.2.
Cleaning of Equipment
It is recommended to clean the treadmill and lower control
panel after each workout. Wipe exposed surfaces with a
microfiber cloth dampened with a mixture of three parts water
to one part Simple Green
4.2.1. Vacuuming Around the Treadmill
On a weekly basis, fold and lock the treadmill in the UP
position. Vacuum underneath and around the surrounding
areas of the treadmill.
4.2.2. Control Panel/Touch Screen Cleaning
CAUTION
CAUTION
CAUTION
CAUTION
Important: To prevent pressure damage be careful not to press
too hard on screen while cleaning.
Do not use abrasive cloths, such as rags or paper
towels. They can spread lint and/or damage the
screen.
Avoid cleaning products that may cause
discoloration, such as rubbing alcohol, bleach or
ammonia-based cleaners.
®
cleaner: www.simplegreen.com
49
Advertisement
Table of Contents
