Table of Contents
Advertisement
Caution: Powered abrasives, abrasive cleaners and steel wool will damage vinyl, as do
strong solvents, lacquer solutions and inks. Lotions, suntan oil, waxes and polishes, etc.,
contain oils and dyes that can cause stiffening and staining of the vinyl. Never use
steam, heat guns or hair dryers.
For additional information regarding the care and maintenance of this product, please refer to the
Morbern brochure provided in your owner's package for recommended methods to clean specific types of
stains.
Exterior Vinyl – Upholstered Seats and Cockpit Bolsters
Vinyl requires periodic cleaning to maintain its neat appearance and to prevent the build-up of dirt and
contaminants that may permanently stain and reduce the life of the vinyl if they are not removed. The
frequency of cleaning depends on the amount of use and on environmental conditions to which the vinyl
is subjected. The procedures used for cleaning are dependent upon the end use circumstances.
For normal cleaning, most stains can be cleaned using warm soapy water and a clear water rinse.
Moderate scrubbing with a medium bristle brush will help to loosen soiling material from the depressions
of embossed surfaces. For stubborn stains, use either Fantastic or Mr. Clean, which are commercially
available mild detergents, in accordance with manufacturers instructions.
For additional information regarding the care and maintenance of this product, please refer to the
Morbern brochure provided in your owner's package for recommended methods to clean specific types of
stains.
Cloth
Cabin Cushions
The manufacturer of the materials used in making the cabin cushions recommends the following cleaning
procedures:
Spot clean only with water based shampoo or foam upholstery cleaner. Pretest a small, inconspicuous
area before proceeding. Do not over wet. Do not use solvents to spot clean. Pile fabrics may require
brushing with a non-metallic, stiff bristle brush to restore appearance.
Note:
Water extraction or steam cleaning is not a recommended cleaning method.
Cushion covers should not be removed and laundered.
frequent vacuuming or light brushing with a non-metallic, stiff bristle brush to remove dust
and grime is recommended. When cleaning a spill, blot immediately to remove spilled
material. Clean spot stains from the outside to the middle of the affected area to prevent
circling.
Use a professional furniture cleaning service when an overall soiled condition has been reached.
For additional information regarding the care and maintenance of this product, please refer to the
Morbern brochure provided in your owner's package for recommended methods to clean specific types of
stains.
Single Burner Butane Stove
Body/base of the stove: Allow the stove to cool completely and remove the butane canister before
attempting to clean the unit. Wash the outside of the unit, the drip pan and the canister cover with warm
water. Then dry all parts with a cloth.
To prevent overall soiling,
49
Advertisement
Table of Contents
