Advertisement
Basic Operation of the Operation Panel
Operation mode switchover
At power-ON (External operation mode)
PU operation mode
(output frequency monitor)
Parameter setting mode
parameter setting
Value change
General-purpose
Keep pressing
motor control
the setting dial
Output current monitor
Value change
Parameter clear
Automatic
IPM parameter
[Operation for displaying faults history]
The past eight faults can be displayed using the setting dial.
(The latest fault is ended by ".".)
When no fault history exists,
While a fault is displayed:
The display shifts as follows by pressing
Output current
Output voltage
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault history number.
PU Jog operation mode
(After 1s)
Set frequency
is displayed
Hz
A
STOP
All parameter
clear
initialization
is displayed.
: Output frequency at the fault
Energization time.
(Example)
and frequency flicker alternately.
Frequency setting has been
written and completed!!
Output voltage monitor
Display the
present setting
(Example)
Parameter and a setting value
flicker alternately.
Parameter write is completed!!
Faults history clear
Initial value
change list
18
Advertisement
