Table of Contents
Advertisement
T O R Q U E S E T T I N G S F O R S C R E W S
TORQUE SETTINGS FOR PANEL SCREWS
PANEL SCREWS MUST BE TIGHTED WITH A TORQUE WRENCH!
The (12x) hex-head screws holding the panels MUST be tightened with a torque wrench (not
included).
TORQUE SETTING = 11 lbf-in. (12.7kgf-cm) *
* lbf-in = Pound Force Inches | kgf-cm = Kilogram Force Centimeters
20
Advertisement
Table of Contents
