Elation PRS022 User Manual page 40

SYSTEM MENU
EDIT PROGRAM – Rec. Controller
The fixture features an integrated DMX-recorder by which you can transmit the programmed scenes
from your DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from
– to). When you call up the scenes at your controller, they will automatically be transmitted to the
moving head.
EDIT PROGRAM – Record Controller – Working with Built-In Programs
A Primary unit can send up to 3 different data groups to the Secondary units, i.e. a Primary unit can
start 3 different Secondary units, which run 3 different programs. The Primary unit sends the 3 program
parts in a continuous loop.
The Secondary unit receives data from the Primary unit according to the group which the Secondary
unit was assigned to. If e.g. a Secondary unit is set to "Secondary 1" in the menu "Set to Secondary",
the Primary unit sends "Auto Program Part 1" to the Secondary unit.
If set to "Secondary 2", the Secondary unit receives "Auto Program Part 2".
40