Elation PRS022 User Manual page 41

S Y S T E M M E N U
EDIT PROGRAM – Record Controller – Working with Built-In Program [continued]
To start an Auto Program, proceed as follows:
1. Secondary Setting
Select "Function Mode".
Press ENTER to confirm.
Select "Set to Secondary".
Press ENTER to confirm.
Select "Secondary 1", "Secondary 2" or "Secondary 3".
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
2. Automatic Program Run
Select "Function Mode".
Press ENTER to confirm.
Select "Auto Program".
Press ENTER to confirm.
Select "Primary" or "Alone".
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
3. Program Selection for Auto Pro Part
Select "Edit Program".
Press ENTER to confirm.
Select "Select Programs".
Press ENTER to confirm.
Select "Auto Pro Part 1", "Auto Pro Part 2" or "Auto Pro Part 3" and select which Secondary
program is to be sent. Selection "Part 1" means, that the Secondary unit runs the same program as
the primary units.
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
4. Program Selection for Edit Program
Select "Edit Program".
Press ENTER to confirm.
Select "Edit Program".
Press ENTER to confirm.
Select the desired program to edit specific scenes into a specific program.
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
41