Default Settings - Elation power spot 575 User Manual

Power Spot 575™
wheels and other motors. This feature is reserved for a service technician and
is sometimes required after a service or repair work.
This function requires a service code only available to authorized service
technicians.
Use the Up and Down buttons to select the function that requires calibration
and press the Enter button to confirm the adjustment or the Mode button to
cancel and return to the menu. Use the Up and Down buttons to set the
adjustment values and confirm once more with the Enter button or use the
Mode button to cancel the operation.
Function
ADJU
COLO
GOB1
GOB2
PRIS
SHTR
POFS
TOFS
ARES
CLRE
FACC
VTIL
VTOP
VBOT
FASP

3.9.9 Default Settings

DFSE
This function is used to restore all the factory default settings and presets.
Press the Enter button to confirm this operation or the Mode button to cancel
and return to the menu. When this operation is selected the LED will briefly
readout
factory defaults.
Function
©Elation Professionals® Los Angeles, Ca.
Value
CODE xxxx
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
Adjustments in the internal circuit.
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
- 99 - + 9 9
ok , then return to the previous function. The chart below details the
Remark
Adjustments in the internal setup are code
protected (for authorized persons only).
Adjustment of the Color wheel
Adjustment of the Gobo wheel 1
Adjustment of the Gobo wheel 2
Adjustment of the Prism wheel
Adjustment of the Shutter
Adjustment of the Pan-Offsets
Adjustment of the Tilt-Offsets
Adjust Reset (wheels stand still after the reset)
Must switched to ON (code protected)
Software version of Tilt-board
Software version of Head- board
Software version of Base- board
Indication of the Fan-Speed
Display
- wwww.ElationLighting.com
Default Settings
- Page
24