Equipment Wiring - Creality Ender-3 V3 SE User Manual

3. Assembly Procedure

3.4 Equipment Wiring

Extruder adapter board
Caution
Please ensure the correct position for the power supply switch and mains
●
before supply connection, in order to avoid damage to the device.
If the mains between 100V and 120V, please select the 115V for the power
●
supply switch.
If the mains between 200V and 240V, please select the 230V for the power
●
supply switch (default is 230V).
X-axis motor
④ Switch on the power
Z-axis motor
① First, insert the extruder cable into the extruder
adapter board, then secure it with the FFC fixing
clip assembly;
② Follow the label instructions to secure the
extruder cable into the cable fixing clip before
connecting the X-axis motor;
Tips:
Please ensure proper wiring according
to the provided diagram and avoid
overturning or folding the extruder
cable, as it may cause printing
abnormalities.
06
③ Connect the Z-axis motor