Table of Contents
Advertisement
Parameter
Description
167
Cubic meters of fule (resettable)
162
Operating hours (resettable)
163
Device operating hours
164
Burners start-ups (resettable)
166
Total number of start-ups
113
Burner number (i.e. serial number)
107
Software version
102
Software date
103
Device serial number
104
Customer code
105
Version
143
Free
5
Example: choose parameter 102 to show the date
the display shows parameter 102 flashing on the left and characters ._._ on the right.
6
press InFo for 1-3 seconds: the date will appear
7
press InFo to go back to parameter "102"
8
by pressing + / -, it is possible to scroll up/down the parameter list (see table above), or, by pressing ESC or InFo for more seconds,
the display will show
9
Once the last parameter is accessed (143) by pressing + , the End message will flash.
10 Press InFo
for more than three seconds or for more than three seconds orto return to the normal display.
If a message like the one below is shown during operation,
it means that the burner is locked out and the Errore code is shown (in the example "error code:4"); this message is alternating with
another message
33
PART III: OPERATION
Advertisement
Table of Contents
