Table of Contents
Advertisement
Siemens VGD SKPx5 (Auxiliary-optional micro switch)
Actuator connection
Gas valveGas Filter (if provided)
The gas filters remove the dust particles that are present in the gas, and prevent the elements at risk (e.g.: burner valves, counters and
regulators) from becoming rapidly blocked. The filter is normally installed upstream from all the control and on-off devices.
ATTENTION: it is reccomended to install the filter with gas flow parallel to the floor in order to prevent dust fall on
the safety valve during maintenance operation.
Once the train is installed, connect the gas valves group and pressure switches plugs.
Overall dimensions (mm) -
405
Speed Sensor AGG 5.310 is a speed sensor kit used to monitor the speed of a motor. This kit is used to mount the speed sensor
directly on the motor casing.
N
L
1
2
1
BURNERS WITH INVERTER VARIANT (if provided)
Valve drive
Plug connection
2
3
3
A Valve closed
21
PART II: INSTALLATION
End of stroke
Plug connection
(only with SKPxx.xx1xx)
238
Advertisement
Table of Contents
