Table of Contents
Advertisement
NAVIGATION MENU
Basic display
Main
navigation
one level
back
RWF55 is preset good for 90% of applications. However, you can set or edit parameters as follow:
Set-point: set or modification:
When the burner is in stand-by, (safety loop open, that is terminals 3-4/T1-T2 on the 7 pole plug open) push the Enter button: on the lower display
(green) Opr appears; push Enter again and in the same display SP1 appears. Push Enter again and the lower display (green SP1) flashes. Using the up
and down arrows change the set-point on the upper display (red).Push Enter to confirm and push ESC more times to get the home position.
next parameter
one level
down
previous parameter
Parameter level
4
User Level - Opr
SP1 or SP2 (editable)
dSP readable and editable
through bin1 = 2
InP1 or y (only display)
Parameter level - PArA
Pb1, dt, rt, db, tt
Heating controllerHYS1 , HYS2 ,
HYS3
Cooling controller
HYS4 , HYS5 , HYS6
q, At1, Ht1, At2, Ht2
Configuration level – ConF
and lower level
Analog inputs
Controller
Thermal shock protection
Alarm function
Controllig outputs
Binary inputs
Display
Interface
InP ..
Cntr
rAFC
AF
outP
binF
diSP
intF
Advertisement
Table of Contents
