Operation Example - Unigas G258A Manual Of Installation - Use - Maintenance

SETPOINT AND HYSTERESIS CONFIGURATION (SP, AL1, HAL1 parameters)
Push the button to enter into the setpoint configuration:
Back to the first parameter
To return to normal mode, press the

Operation example

M12927CA
SP setpoint value change:
SP
increase
2480
Confirm / Next
AL1
AL1 parameter value change:
increase
250
Confirm / Next
HAL1
HAL1 parameter value change:
increase
250
Confirm / Next
key for 3 seconds or wait the 10s timeout
5
decrease
decrease
decrease