Unigas G258A Manual Of Installation - Use - Maintenance page 22

PART II: INSTALLATION
BURNERS WITH INVERTER VARIANT (if provided)
DANFOSS
The LMV51.300 / LMV52.xxx e LMV37.400/LMV26.300 electronic cam burners with fan motor driven by inverter in addition to the air
and fuel adjustment curves also have a fan motor speed adjustment curve.
The LMV5x equipment through a sensor controls the fan motor revolutions and with a signal in 4÷20mA controls it through the inverter.
The LMV2x equipment through a sensor controls the fan motor revolutions and with a signal in 0÷10V controls it through the inverter.
Generally the curve of the inverter goes from 50% to 100% of the engine revolutions. This, in addition to improving the setting of the
burner also allows a saving on the consumption of the fan engine..
Two series of interchangeable Inverters version with
Inverter FC101 and FC102
Terminal interface with Inverter
LMV5
Type
XXXXX
XXXXX
LMV5
XXXXX
XXXXX
XXXXX
LMV2x/3x
XXXXX
Danfoss FC102
Braking resistances
possibility of use only for FC102
22
Model
M-. MD. xx. xx. x. x. xxx. EI.
M-. MD. xx. xx. x. x. xxx. EG.
MG. MD. xx. xx. x. x. xxx. EK.
MG. MD. xx. xx. x. x. xxx. ER.
M-. MD. xx. xx. x. x. xxx. EB.
MG. MD. xx. xx. x. x. xxx. EC.
Danfoss FC101
LMV2x/3x