Table of Contents
Advertisement
1.5 Product Specifications
WGS-804HPT / WGS-4215-8P2S
Product
Hardware Specifications
Copper Ports
SFP/mini-GBIC Slots
PoE Inject Port
Switch Architecture
Switch Fabric
Switch Throughput@64 bytes
MAC Address Table
Shared Data Buffer
Flow Control
Jumbo Frame
Reset Button
Power LED
PoE Power
Usage LED
PoE Port
LED
LAN Port
Connector
Power Requirements
WGS-804HPT
8-Port 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
---
4-Port with 802.3af / 802.3at PoE injector
function (Port-1 to Port-4)
Store-and-Forward
16Gbps/non-blocking
11.9Mpps @64 bytes
8K entries
4.1 megabits
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
10 Kbytes
< 5 sec: System reboot
> 5 sec: Factory default
Power (Green)
30W, 60W, 90W, 120W (Green)
Port-1 to Port-4:
- PoE-in-Use (Orange)
- LNK/ACT (Green)
10/100/1000BASE-TX Port (Port-5 to
Port-8):
- 1000 (Green)
- LNK/ACT (Green)
Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
DC power jack with 2.0mm central pole
48~56V DC, 3A (max.)
19
User's Manual of WGS Managed Series
WGS-4215-8P2S
2 x 100/1000BASE-X SFP interfaces
Supports 100/1000Mbps dual mode and
DDM
8-Port with 802.3af / 802.3at PoE injector
function (Port-1 to Port-8)
20Gbps/non-blocking
14.8Mpps @64 bytes
Power (Green)
N/A
Port-1 to Port-8:
- PoE-in-Use (Orange)
- LNK/ACT (Green)
100/1000X SFP Ports (Port 9 to Port 10):
- 1000 LNK/ACT (Green)
- 100 LNK/ACT (Orange)
48~56V DC, 5A (max.) terminal block
power input
48~56V DC, 5A (max.) DC jack power
input
Note: The two power input interfaces
don't support power redundant
function.
Advertisement
Table of Contents
