Ipv6 Ping Test - Planet Networking & Communication WGS-4215-8P2S User Manual

Industrial wall-mounted gigabit ethernet switch
Table of Contents

Advertisement

Be sure the target IP Address is within the same network subnet of the switch, or you have to set up
the correct gateway IP address.

4.13.4 IPv6 Ping Test

This page allows you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivity issues.
After you press "Apply", 5 ICMPv6 packets are transmitted, and the sequence number and roundtrip time are displayed upon
reception of a reply. The page refreshes automatically until responses to all packets are received, or until a timeout occurs. The
ICMPv6 Ping screen in
Figure 4-13-4
The page includes the following fields:
Object
IP Address
 Count
 Interval (in sec)
Size (in bytes)
Ping Results
Buttons
: Click to transmit ICMPv6 packets
appears.
Figure 4-13-4 ICMPv6 Ping Page Screenshot
Description
The destination IPv6 Address
Number of echo requests to send
Send interval for each ICMP packet
The payload size of the ICMP packet. Values range from 8bytes to 5120bytes
Display the current ping result
321
User's Manual of WGS Managed Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs-4215-8t2sWgs-804hptWgs-4215-8t

Table of Contents