Mld Group Table; Mld Router Setting - Planet Networking & Communication WGS-4215-8P2S User Manual

4.7.4.3 MLD Group Table

This page provides MLD Group Table. The MLD Group Table screen in
The page includes the following fields:
Object
 VLAN ID
 Group IP Address
 Member Port
 Type
 Life(Sec)

4.7.4.4 MLD Router Setting

Depending on your network connections, MLD snooping may not always be able to locate the MLD querier. Therefore, if the
MLD querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your Managed
Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the
attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the Managed Switch.
The MLD Router Setting screens in
Figure 4-7-27 MLD Group Table Page Screenshot
Description
Display the current VID
Display multicast IP address for a specific multicast service
Display the current member port
Member types displayed include Static or Dynamic, depending on selected
options
Display the current life
Figure 4-7-28 & Figure 4-7-29
Figure 4-7-28 Add Router Port Page Screenshot
184
User's Manual of WGS Managed Series
Figure 4-7-27 appears.
appear.