Vestfrost VCF 13200 NoFrost User Manual page 53

PART - 6.
BEFORE CALLING YOUR AFTER SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels
or if a problem occurs with the appliance. Warning codes are displayed in the freezer and
cooler indicators.
ERROR
TYPE
[Sr] "Failure" Warning
[Sr] – Set
value blink
Freezer compartment
on freezer
is not cold enough
set value
screen
[Sr] – Set
value Blink Refrigerator
on cooler compartment is not
set value cold enough
screen
[Sr] – Set
value blink
on freezer "Not cold enough"
and cooler
Warning
set value
screen
[Sr] – Set
value blink
Refrigerator
on cooler
compartment too cold
set value
screen
MEANING
There is/are some
part(s) out of order
or there is a failure in
the cooling process.
This warning
especially appears
if there has been a
power failure for a
long period or when
the refrigerator is
operated for the first
time.
This warning
especially appears
if there has been a
power failure for a
long period or when
the refrigerator is
operated for the first
time. Ideal
temperature for
the refrigerator
compartment is
+4
warning, your foods
are at risk of spoiling.
It is combination of
"not cool enough"
error for both of the
compartments.
The food will start to
freeze because the
temperature is too
cold.
WHY
Call a service agent for assistance
as soon as possible.
1. Use food within a short time
2. Set the freezer temperature to
3. Do not put fresh food in the
1. Set the refrigerator temperature
2. Open the door as little as
C. If you see this
o
You will see this failure when first
starting the appliance. It will clear
after the compartments reach
normal temperature.
1. Check if the Super Cooling mode
2. Decrease the refrigerator
EN -53-
WHAT TO DO
period. Do not freeze foods that
has thawed.
colder values or set the Super
Freeze until the compartment
gets to normal temperature.
appliance until the fault has
cleared.
to colder values or set the
Super Cooling mode until the
compartment reaches normal
temperature.
possible until the fault clears.
is switched on.
temperature values.