Leds; Table 2-7 Parameters Of The Snmp Interface; Table 2-8 Leds - Raisecom ISCOM2600 (B) Series Product Description

Raisecom
ISCOM2600 (B) Series Product Description

Table 2-7 Parameters of the SNMP interface

Connector type
Transmission rate
Wiring
Standard

2.3 LEDs

Table 2-8 lists LEDs.

Table 2-8 LEDs

LNK/ACT
LNK/ACT
PWR
SNMP
SYS
Parameter
RJ45
10/100/1000BASE-T auto-negotiation
Support adaption to the straight-through cable and crossover cable
in host mode.
IEEE 802.3
LED Status
Green Ethernet interface working status LED



Green 10 Gbit/s SFP+ interface working status LED



Green Power working status LED


Green SNMP interface working status LED



Green System working LED



Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Green: the interface is properly connected.
Blinking green: the interface is receiving or sending data.
Off: the interface is disconnected or improperly connected.
Green: the interface is properly connected.
Blinking green: the interface is receiving or sending data.
Off: the interface is disconnected or improperly connected.
Green: the power supply is normal.
Off: the power supply is off, the power module is installed
improperly or fails.
Green: the SNMP interface is properly connected.
Blinking green: the SNMP interface is receiving or sending
data.
Off: the SNMP interface is disconnected or improperly
connected.
Green: the system is working improperly.
Blinking green (every 1s): the system has loaded the
configuration file or the device is configured.
Off: the system is working improperly.
Description
2 System structure
29