Table of Contents
Advertisement
8.0 ELECTRICAL INFORMATION
WARNING: Do not use this fireplace if any part has been under
water. Immediately call a qualified service technician to inspect
this appliance and to replace any part of the control system
and any gas control which has been under water.
8.1 Electrical Specifications
This appliance, when installed, must be electrically grounded in
accordance with local codes, or in the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22.1.
Figure 8.1, Wiring Schematics
8.2 Wiring Requirements
•
The IFC System Module requires 120V of electricity /
batteries to operate.
•
Using the battery back-up will operate the burner only.
•
Optional fan and light components will not function on batter
back up power.
20
Advertisement
Table of Contents
